14:17. Replacement of lamps
Forward indexes of turns / parking fires and marker lights
Civic models
|
|
1. For replacement of the left lamp (from the driver) at the started engine turn out wheels against the stop to the right, then switch off ignition. The right lamp changes at the wheels which are turned out to the left.
2. Release a clamp and remove a loker of the corresponding wheel arch.
3. Turn a lamp cartridge on 1/4 turns counterclockwise and take it from a casing of assembly of a lamp. Press a lamp in a cartridge, turn it on 1/8 turns counterclockwise, then pull outside and release from cartridge assembly. Installation is made upside-down. |
|
Integra
|
|
|
|
1a. Give fixing screws and take assembly of a lamp from the car wing panel (see accompanying illustrations). |
|
|
1b. Turn a cartridge on 1/8 turns counterclockwise and take it from a casing of lantern assembly. |
2. Take a lamp from the boss.
3. Installation is made upside-down. |
|
Back marker lights and stoplights
|
|
1. Open a cover a luggage carrier/door of a back and remove a decorative cover of the corresponding back lamp.
|
|
2a. Turn a lamp cartridge counterclockwise and take it from a casing of lantern assembly (see accompanying illustrations). |
|
|
2b. An arrangement of lamps of the back combined lamp on the Integra models (the decorative cover is removed). |
3. Press a lamp in a cartridge, turn counterclockwise and take outside.
4. Installation is made upside-down. |
|
Stoplights of the top level
Civic
|
|
1. Remove decorative covers (if they are provided) two fixing screws, give the last and remove assembly of a stoplight of the top level from the body panel.
2. Turn a cartridge counterclockwise and take it from a casing of lantern assembly. Having pulled, take a lamp.
3. Installation is made upside-down. |
|
Integra
|
|
|
|
1. Open a luggage carrier, having provided thereby access to a stoplight of the top level (see an accompanying illustration). |
2. Turn a lamp cartridge counterclockwise and release it from lantern assembly.
3. Having pulled outside, take a lamp from the boss.
4. Installation is made upside-down. |
|
Illumination of devices
|
|
1. Remove a combination of devices (see Removal and installation of a combination of devices).
|
|
2. Turn a lamp cartridge counterclockwise from assembly of a combination of devices (see an accompanying illustration). |
3. Having pulled outside, take a lamp from the boss.
4. Installation is made upside-down. |
|
Illumination of registration plate
|
|
1. Turn out two fixing screws and remove a lens of a lamp of illumination of registration plate.
|
|
2. Turn a lapovy cartridge counterclockwise and take it from lantern assembly (see an accompanying illustration). |
3. Having pulled outside, release a lamp from the boss.
4. Installation is made upside-down. |
|
Internal lamps (salon, luggage compartment)
|
|
|
|
1. Having accurately hooked the screw-driver, remove a lens from the corresponding lamp. |
2. Release a lamp from spring plugs. If there is a need for a lamp poddevaniye, start the lever only under edges of socles of a lamp in order to avoid damage of a flask.
3. Installation is made upside-down.
|
|