If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!

3a. Turn out the central screws of fastening of the antispray screen.

3b. Under the car turn out screws of fastening of bottom edges of an overlay of a bumper (see accompanying illustrations).

4. Working through arches of forward wheels, turn out screws of an overlay of a bumper to loker (see an accompanying illustration).

5. Turn out bolts of fastening of an overlay of a bumper to the car chassis (see an accompanying illustration).

6. Give screws (or, on some models, take plastic clamps) fastenings of the upper edge of a slip (see an accompanying illustration) and remove the last from the car.

Plastic clamps are taken by a poddevaniye by the suitable tool after preliminary release of the central pin.

2. Under the car take plastic clamps and turn out screws of fastening of bottom edge of an overlay of a rear bumper (see an accompanying illustration).

3. Turn out screws of fastening of a slip to arches of back wheels (see an accompanying illustration).

4a. Open a cover a back luggage carrier/door.

4b. From within the luggage compartment give screws and nuts of fastening of the upper edges of an overlay of a bumper (see accompanying illustrations). Remove an overlay of a bumper from the car.