13:25. Removal and installation of the dashboard
|
|
Considered in the present manual of the car are equipped with safety cushions (SRS). When performing any works near sensors of blows, a steering column or the dashboard disconnect SRS (see schemes of electric connections at the end of the Head Onboard electric equipment).
If the stereosystem established on the car is equipped with a security code before disconnecting the rechargeable battery make sure that you have the correct combination for input of the audio system in action!
|
Facing of an instrument guard
|
|
1. Lower a steering column in the lower situation.
|
|
2. Turn out two fixing screws with crosswise vents (see an accompanying illustration), then pull facing on yourself and release its clamps from assembly of an instrument guard. |
3. Disunite interfering with facing removal electric sockets.
4. Installation is made upside-down. |
|
Lower section of the dashboard
|
|
|
|
1. Turn out the lower bolts of fastening of the sound-proof panel to the lower casing of a steering column. Give screws of fastening of a cover of a casing of a column (see an accompanying illustration). |
2. Lift bottom edge of a cover of a steering column up, then release the upper edge from clamps.
3. Disunite electric sockets and lower the lower section of the dashboard.
4. Installation is made upside-down. |
|
Knee emphasis
|
|
1. Remove the lower cover of a casing of a steering column (see the previous subsection).
|
|
2. Give fixing bolts and remove a knee emphasis from the car (see an accompanying illustration). |
3. Installation is made upside-down. |
|
Ware box
|
|
|
|
1. Turn out two loopy screws (see an accompanying illustration), open a cover, squeeze lock uvulas of plastic clamps, omit assembly of a ware box down and take it from the dashboard.
|
2. Installation is made upside-down. |
|
Central section